Antimicrobial Copper Surfaces Maintain Terminal Clean Levels in Hospitals

Antimicrobial Copper surfaces at Grinnell Regional Medical Center in Iowa

New research published in the American Journal of Infection Control reports antimicrobial copper touch surfaces installed in hospital patient rooms significantly reduced concentrations of bacteria, sustaining levels prescribed on completion of terminal cleaning.

5th October 2016

Grinnell College’s Associate Professor of Biology, Shannon Hinsa-Leasure, PhD, and her team conducted research over 18 months at Grinnell College and Grinnell Regional Medical Center (GRMC) in Iowa, with more than 1,500 samples. The study found significantly fewer bacteria on copper alloy products—such as grab bars, toilet flushes, IV poles, switches, keyboards, sinks and dispensers—than on traditional, non-copper hospital room surfaces.[1]

The study was designed to build on existing research demonstrating the efficacy of antimicrobial copper touch surfaces in boosting infection control in intensive care units, where infections were reduced by 58%.

The new study notes more than half of all healthcare-associated infections are acquired outside ICUs. Here, 20 frequently-touched surfaces—in medical and surgical suite patient rooms, en-suite bathrooms and areas external to patient rooms—were replaced with antimicrobial copper equivalents. Both occupied and unoccupied rooms were studied to determine background bacterial concentrations.

‘Even the most conscientious cleaning will not remove all bacteria cells from a surface, allowing for recolonisation,’ says Hinsa-Leasure. ‘To reduce the risk of patients acquiring an infection while in the hospital, we need to reduce the number of bacteria surrounding them. This is what makes copper so important: it is always working to destroy micro-organisms and will maintain a clean environment for patients.’

With weekly sampling over the course of 12 months, 88% of the samples collected from copper components in occupied areas were below the recommended terminal clean level (250 CFU/100 cm2). During the same period, 55% of control surfaces had burdens above this threshold.

More surprisingly, in unoccupied rooms (given a terminal clean after the patient vacated), 51% of control samples were above the threshold. The observation that microbial populations are re-established on hospital surfaces subsequent to cleaning supported observations made in previous research.[2] 93% of the copper samples from unoccupied rooms were below the threshold.

The researchers further noted most of the copper surfaces went unnoticed by patients, and concluded antimicrobial copper should become an important part of hospital infection control, working in concert with hand hygiene and daily and terminal cleaning.

Following these findings, GRMC President and CEO Todd Linden said the medical centre is now installing bacteria-killing surfaces throughout the facility. Currently, only half of the patient rooms are fitted with copper hardware and components.

‘A wonderful thing about copper is it’s doing its job to kill bacteria 24 hours a day, 365 days a year,’ notes Linden. ‘So, at the end of the day, when I go home, I know that we’ve got a new ally for fighting the potential for infection in our hospital, and that makes me feel great.’

The products used in the study were made from CuVerro® copper alloys, one of several brands of antimicrobial copper materials registered with the Environmental Protection Agency as being permitted to make public health claims in the US.

A wide range of antimicrobial copper products are available from companies around the world, with installations spanning hospitals and care homes, mass transit hubs, buses and trains, schools, restaurants and other areas where people gather and infections can spread.

For more information on antimicrobial copper, visit


  1. Copper alloy surfaces sustain terminal cleaning levels in a rural hospital
    Shannon M. Hinsa-Leasure, Queenster Nartey, Justin Vaverka, Michael G. Schmidt. American Journal of Infection Control, 28 September 2016
  2. Intrinsic bacterial burden associated with intensive care unit hospital beds: Effects of disinfection on population recovery and mitigation of potential infection risk
    Hubert H. Attaway III, Sarah Fairey, Lisa L. Steed, Cassandra D. Salgado, Harold T. Michels, Michael G. Schmidt. American Journal of Infection Control, December 2012, Volume 40, Issue 10, Pages 907–912


Installing Antimicrobial Copper Components
Shows how Grinnell Regional Medical Center installed antimicrobial copper surfaces throughout their facility to supplement their infection control program.

Cleaning and Maintaining Antimicrobial Copper Surfaces
Shows how Grinnell Regional Medical Center deployed antimicrobial copper without having to alter their existing cleaning and disinfection practices.

Copper and copper alloys are engineering materials that are durable, colourful and recyclable and are widely available in various product forms suitable for a range of manufacturing purposes. Copper and its alloys offer a suite of materials for designers of functional, sustainable and cost-effective products.

Copper and certain copper alloys have intrinsic antimicrobial properties (so-called ‘Antimicrobial Copper’) and products made from these materials have an additional, secondary benefit of contributing to hygienic design. Products made from Antimicrobial Copper are a supplement to, not a substitute for standard infection control practices. It is essential that current hygiene practices are continued, including those related to the cleaning and disinfection of environmental surfaces.

By continuing to use the site, you agree to the use of cookies. Find out more by following this link.